Monday, 25 November 2013

Module IV - Global Warming - Greenhouse gases


Global warming refers to the increase in the average temperature of the Earth's near-surface air and oceans in recent decades and its projected continuation.
The measured global average air temperature near the Earth's surface rose 0.74 ± 0.18 °C (1.33 ± 0.32 °F) during the last 100 years. The Intergovernmental Panel on Climate Change (IPCC) concludes, "most of the observed increase in globally averaged temperatures since the mid-20th century is very likely due to the observed increase in anthropogenic greenhouse gas concentrations" via the greenhouse effect. Natural phenomena such as solar variation combined with volcanoes probably had a small warming effect from pre-industrial times to 1950 and a small cooling effect from 1950 onward. These basic conclusions have been endorsed by at least 30 scientific societies and academies of science, including all of the national academies of science of the major industrialized countries. However, a few individual scientists disagree with some of the main conclusions of the IPCC.
Climate models referenced by the IPCC project that global surface temperatures are likely to increase by 1.1 to 6.4 °C (2.0 to 11.5 °F) between 1990 and 2100. The range of values results from the use of differing scenarios of future greenhouse gas emissions as well as models with differing climate sensitivity. Although most studies focus on the period up to 2100, warming and sea level rise are expected to continue for more than a millennium even if greenhouse gas levels are stabilized. This reflects the large heat capacity of the oceans.
An increase in global temperatures is expected to cause other changes, including sea level rise, increased intensity of extreme weather events, and changes in the amount and pattern of precipitation. Other effects of global warming include changes in agricultural yields, glacier retreat, species extinctions and increases in the ranges of disease vectors.
Remaining scientific uncertainties include the amount of warming expected in the future, and how warming and related changes will vary from region to region around the globe. There is ongoing political and public debate worldwide regarding what, if any, action should be taken to reduce or reverse future warming or to adapt to its expected consequences. Most national governments have signed and ratified the Kyoto Protocol, aimed at reducing greenhouse gas emissions.
Causes : Green House Gases and Green House Effects, Solar Variation.

Greenhouse gases
Greenhouse gases are components of the atmosphere that contribute to the greenhouse effect. Some greenhouse gases occur naturally in the atmosphere, while others result from human activities such as burning of fossil fuels such as coal. Greenhouse gases include water vapor, carbon dioxide, methane, nitrous oxide, and ozone.
When sunlight reaches the surface of the Earth, some of it is absorbed and warms the surface. Because the Earth's surface is much cooler than the sun, it radiates energy at much longer wavelengths than does the sun. The atmosphere absorbs these longer wavelengths more effectively than it does the shorter wavelengths from the sun. The absorption of this longwave radiant energy warms the atmosphere; the atmosphere also is warmed by transfer of sensible and latent heat from the surface. Greenhouse gases also emit longwave radiation both upward to space and downward to the surface. The downward part of this longwave radiation emitted by the atmosphere is the "greenhouse effect." The term is a misnomer, as this process is not the mechanism that warms greenhouses.
The major greenhouse gases are water vapor, which causes about 36-70% of the greenhouse effect on Earth (not including clouds); carbon dioxide, which causes 9-26%; methane, which causes 4-9%, and ozone, which causes 3-7%. It is not possible to state that a certain gas causes a certain percentage of the greenhouse effect, because the influences of the various gases are not additive. Other greenhouse gases include, but are not limited to, nitrous oxide, sulfur hexafluoride, hydrofluorocarbons, perfluorocarbons and chlorofluorocarbons. The major atmospheric constituents (nitrogen, N2 and oxygen, O2) are not greenhouse gases. This is because homonuclear diatomic molecules such as N2 and O2 neither absorb nor emit infrared radiation, as there is no net change in the dipole moment of these molecules when they vibrate. Molecular vibrations occur at energies that are of the same magnitude as the energy of the photons on infrared light. Heteronuclear diatomics such as CO or HCl absorb IR; however, these molecules are short-lived in the atmosphere owing to their reactivity and solubility. As a consequence they do not contribute significantly to the greenhouse effect.
Late 19th century scientists experimentally discovered that N2 and O2 did not absorb infrared radiation (called, at that time, "dark radiation") and that CO2 and many other gases did absorb such radiation. It was recognized in the early 20th century that the known major greenhouse gases in the atmosphere caused the earth's temperature to be higher than it would have been without the greenhouse gases.

Anthropogenic greenhouse gases
The concentrations of several greenhouse gases have increased over time. Human activity increases the greenhouse effect primarily through release of carbon dioxide, but human influences on other greenhouse gases can also be important. Some of the main sources of greenhouse gases due to human activity include: burning of fossil fuels and deforestation leading to higher carbon dioxide concentrations; livestock and paddy rice farming, land use and wetland changes, pipeline losses, and covered vented landfill emissions leading to higher methane atmospheric concentrations. According to the Food and Agriculture Organization of the United Nations, the livestock industry is responsible for 18 percent of greenhouse gas emissions measured in CO2 equivalent, a higher share than transportation. Many of the newer style fully vented septic systems that enhance and target the fermentation process also are major sources of atmospheric methane;
use of chlorofluorocarbons (CFCs) in refrigeration systems, and use of CFCs and halons in fire suppression systems and manufacturing processes.
Agricultural activities, including the use of fertilizers, that lead to higher nitrous oxide concentrations.
The seven sources of CO2 from fossil fuel combustion are (with percentage contributions for 2000-2004): Solid fuels (e.g. coal): 35% Liquid fuels (e.g. gasoline): 36% Gaseous fuels (e.g. natural gas): 20% Flaring gas industrially and at wells: <1% Cement production: 3% Non-fuel hydrocarbons: <1%  The "international bunkers" of shipping and air transport not included in national inventories: 4%
Greenhouse gas emissions from industry, transportation and agriculture are very likely the main cause of recently observed global warming. Major sources of an individual's GHG include home heating and cooling, electricity consumption, and transportation. Corresponding conservation measures are improving home building insulation, cellular shades, compact fluorescent lamps and choosing high miles per gallon vehicles.
Carbon dioxide, methane, nitrous oxide and three groups of fluorinated gases (sulfur hexafluoride, HFCs, and PFCs) are the major greenhouse gases and the subject of the Kyoto Protocol, which entered into force in 2005.
CFCs, although greenhouse gases, are regulated by the Montreal Protocol, which was motivated by CFCs' contribution to ozone depletion rather than by their contribution to global warming. Note that ozone depletion has only a minor role in greenhouse warming though the two processes often are confused in the popular media.


Module IV - Ozone depletion

Ozone depletion & Ozone Hole
Ozone depletion describes two distinct, but related observations: a slow, steady decline of about 4 percent per decade in the total amount of ozone in Earth's stratosphere since around 1980; and a much larger, but seasonal, decrease in stratospheric ozone over Earth's polar regions during the same period. The latter phenomenon is commonly referred to as the ozone hole.
In addition to this well-known stratospheric ozone depletion, there are also tropospheric ozone depletion events, which occur near the surface in polar regions during spring.
The detailed mechanism by which the polar ozone holes form is different from that for the mid-latitude thinning, but the most important process in both trends is catalytic destruction of ozone by atomic chlorine and bromine. The main source of these halogen atoms in the stratosphere is photodissociation of chlorofluorocarbon (CFC) compounds, commonly called freons, and of bromofluorocarbon compounds known as halons. These compounds are transported into the stratosphere after being emitted at the surface. Both ozone depletion mechanisms strengthened as emissions of CFCs and halons increased.
CFCs, halons and other contributory substances are commonly referred to as ozone-depleting substances (ODS). Since the ozone layer prevents most harmful UVB wavelengths (270–315 nm) of ultraviolet light (UV light) from passing through the Earth's atmosphere, observed and projected decreases in ozone have generated worldwide concern leading to adoption of the Montreal Protocol banning the production of CFCs and halons as well as related ozone depleting chemicals such as carbon tetrachloride and trichloroethane. It is suspected that a variety of biological consequences such as increases in skin cancer, damage to plants, and reduction of plankton populations in the ocean's photic zone may result from the increased UV exposure due to ozone depletion.

Three forms (or allotropes) of oxygen are involved in the ozone-oxygen cycle: Oxygen atoms (O or atomic oxygen), oxygen gas (O2 or diatomic oxygen), and ozone gas (O3 or triatomic oxygen). Ozone is formed in the stratosphere when oxygen molecules photodissociate after absorbing an ultraviolet photon whose wavelength is shorter than 240 nm. This produces two oxygen atoms. The atomic oxygen then combines with O2 to create O3. Ozone molecules absorb UV light between 310 and 200 nm, following which ozone splits into a molecule of O2 and an oxygen atom. The oxygen atom then joins up with an oxygen molecule to regenerate ozone. This is a continuing process which terminates when an oxygen atom "recombines" with an ozone molecule to make two O2 molecules: O + O3 → 2 O2
The overall amount of ozone in the stratosphere is determined by a balance between photochemical production and recombination.
Ozone can be destroyed by a number of free radical catalysts, the most important of which are the hydroxyl radical (OH•), the nitric oxide radical (NO•) and atomic chlorine (Cl•) and bromine (Br•). All of these have both natural and anthropogenic (manmade) sources; at the present time, most of the OH• and NO• in the stratosphere is of natural origin, but human activity has dramatically increased the chlorine and bromine. These elements are found in certain stable organic compounds, especially chlorofluorocarbons (CFCs), which may find their way to the stratosphere without being destroyed in the troposphere due to their low reactivity. Once in the stratosphere, the Cl and Br atoms are liberated from the parent compounds by the action of ultraviolet light, e.g. ('h' is Planck's constant, 'ν' is frequency of electromagnetic radiation)
CFCl3 + hν → CFCl2 + Cl
The Cl and Br atoms can then destroy ozone molecules through a variety of catalytic cycles. In the simplest example of such a cycle, a chlorine atom reacts with an ozone molecule, taking an oxygen atom with it (forming ClO) and leaving a normal oxygen molecule. A free oxygen atom then takes away the oxygen from the ClO, and the final result is an oxygen molecule and a chlorine atom, which then reinitiates the cycle. The chemical shorthand for these gas-phase reactions is:
Cl + O3 → ClO + O2
ClO + O → Cl + O2
The net reaction is: O3 + O → 2 O2, the "recombination" reaction given above.
The overall effect is to increase the rate of recombination, leading to an overall decrease in the amount of ozone. For this particular mechanism to operate there must be a source of O atoms, which is primarily the photodissociation of O3; thus this mechanism is only important in the upper stratosphere where such atoms are abundant. More complicated mechanisms have been discovered that lead to ozone destruction in the lower stratosphere as well.
A single chlorine atom would keep on destroying ozone for up to two years (the time scale for transport back down to the troposphere) were it not for reactions that remove them from this cycle by forming reservoir species such as hydrogen chloride (HCl) and chlorine nitrate (ClONO2). On a per atom basis, bromine is even more efficient than chlorine at destroying ozone, but there is much less bromine in the atmosphere at present. As a result, both chlorine and bromine contribute significantly to the overall ozone depletion. Laboratory studies have shown that fluorine and iodine atoms participate in analogous catalytic cycles. However, in the Earth's stratosphere, fluorine atoms react rapidly with water and methane to form strongly-bound HF, while organic molecules which contain iodine react so rapidly in the lower atmosphere that they do not reach the stratosphere in significant quantities.
The most pronounced decrease in ozone has been in the lower stratosphere. However, the ozone hole is most usually measured not in terms of ozone concentrations at these levels (which are typically of a few parts per million) but by reduction in the total column ozone, above a point on the Earth's surface, which is normally expressed in Dobson units, abbreviated as "DU". Marked decreases in column ozone in the Antarctic spring and early summer compared to the early 1970s and before have been observed using instruments such as the Total Ozone Mapping Spectrometer (TOMS).
Reductions of up to 70% in the ozone column observed in the austral (southern hemispheric) spring over Antarctica and first reported in 1985 (Farman et al 1985) are continuing. Through the 1990s, total column ozone in September and October have continued to be 40–50% lower than pre-ozone-hole values. In the Arctic the amount lost is more variable year-to-year than in the Antarctic. The greatest declines, up to 30%, are in the winter and spring, when the stratosphere is colder.
Reactions that take place on polar stratospheric clouds (PSCs) play an important role in enhancing ozone depletion. PSCs form more readily in the extreme cold of Antarctic stratosphere. This is why ozone holes first formed, and are deeper, over Antarctica. Early models failed to take PSCs into account and predicted a gradual global depletion, which is why the sudden Antarctic ozone hole was such a surprise to many scientists.
In middle latitudes it is preferable to speak of ozone depletion rather than holes. Declines are about 3% below pre-1980 values for 35–60°N and about 6% for 35–60°S. In the tropics, there are no significant trends.
Ozone depletion also explains much of the observed reduction in stratospheric and upper tropospheric temperatures. The source of the warmth of the stratosphere is the absorption of UV radiation by ozone, hence reduced ozone leads to cooling. Some stratospheric cooling is also predicted from increases in greenhouse gases such as CO2; however the ozone-induced cooling appears to be dominant.
The Antarctic ozone hole is an area of the Antarctic stratosphere in which the recent ozone levels have dropped to as low as 33% of their pre-1975 values. The ozone hole occurs during the Antarctic spring, from September to early December, as strong westerly winds start to circulate around the continent and create an atmospheric container. Within this "polar vortex", over 50% of the lower stratospheric ozone is destroyed during the Antarctic spring.
As explained above, the overall cause of ozone depletion is the presence of chlorine-containing source gases (primarily CFCs and related halocarbons). In the presence of UV light, these gases dissociate, releasing chlorine atoms, which then go on to catalyze ozone destruction. The Cl-catalyzed ozone depletion can take place in the gas phase, but it is dramatically enhanced in the presence of polar stratospheric clouds (PSCs).
These polar stratospheric clouds form during winter, in the extreme cold. Polar winters are dark, consisting of 3 months without solar radiation (sunlight). Not only lack of sunlight contributes to a decrease in temperature but also the “polar vortex” traps and chills air. Temperatures hover around or below -80 °C. These low temperatures form cloud particles and are composed of either nitric acid (Type I PSC) or ice (Type II PSC). Both types provide surfaces for chemical reactions that lead to ozone destruction.
The photochemical processes involved are complex but well understood. The key observation is that, ordinarily, most of the chlorine in the stratosphere resides in stable "reservoir" compounds, primarily hydrogen chloride (HCl) and chlorine nitrate (ClONO2). During the Antarctic winter and spring, however, reactions on the surface of the polar stratospheric cloud particles convert these "reservoir" compounds into reactive free radicals (Cl and ClO). The clouds can also remove NO2 from the atmosphere by converting it to nitric acid, which prevents the newly formed ClO from being converted back into ClONO2.
The role of sunlight in ozone depletion is the reason why the Antarctic ozone depletion is greatest during spring. During winter, even though PSCs are at their most abundant, there is no light over the pole to drive the chemical reactions. During the spring, however, the sun comes out, providing energy to drive photochemical reactions, and melt the polar stratospheric clouds, releasing the trapped compounds.
Most of the ozone that is destroyed is in the lower stratosphere, in contrast to the much smaller ozone depletion through homogeneous gas phase reactions, which occurs primarily in the upper stratosphere.
Warming temperatures near the end of spring break up the vortex around mid-December. As warm, ozone-rich air flows in from lower latitudes, the PSCs are destroyed, the ozone depletion process shuts down, and the ozone hole heals.
Since the ozone layer absorbs UVB ultraviolet light from the Sun, ozone layer depletion is expected to increase surface UVB levels, which could lead to damage, including increases in skin cancer. This was the reason for the Montreal Protocol. Although decreases in stratospheric ozone are well-tied to CFCs and there are good theoretical reasons to believe that decreases in ozone will lead to increases in surface UVB, there is no direct observational evidence linking ozone depletion to higher incidence of skin cancer in human beings. This is partly due to the fact that UVA, which has also been implicated in some forms of skin cancer, is not absorbed by ozone, and it is nearly impossible to control statistics for lifestyle changes in the populace.
Ozone, while a minority constituent in the earth's atmosphere, is responsible for most of the absorption of UVB radiation. The amount of UVB radiation that penetrates through the ozone layer decreases exponentially with the slant-path thickness/density of the layer. Correspondingly, a decrease in atmospheric ozone is expected to give rise to significantly increased levels of UVB near the surface.
Increases in surface UVB due to the ozone hole can be partially inferred by radiative transfer model calculations, but cannot be calculated from direct measurements because of the lack of reliable historical (pre-ozone-hole) surface UV data, although more recent surface UV observation measurement programmes exist (e.g. at Lauder, New Zealand).
Because it is this same UV radiation that creates ozone in the ozone layer from O2 (regular oxygen) in the first place, a reduction in stratospheric ozone would actually tend to increase photochemical production of ozone at lower levels (in the troposphere), although the overall observed trends in total column ozone still show a decrease, largely because ozone produced lower down has a naturally shorter photochemical lifetime, so it is destroyed before the concentrations could reach a level which would compensate for the ozone reduction higher up.
Biological effects of increased UV
The main public concern regarding the ozone hole has been the effects of surface UV on human health. So far, ozone depletion in most locations has been typically a few percent. Were the high levels of depletion seen in the ozone hole ever to be common across the globe, the effects could be substantially more dramatic. As the ozone hole over Antarctica has in some instances grown so large as to reach southern parts of Australia and New Zealand, environmentalists have been concerned that the increase in surface UV could be significant.
Effects on Humans
UVB (the higher energy UV radiation absorbed by ozone) is generally accepted to be a contributory factor to skin cancer. In addition, increased surface UV leads to increased tropospheric ozone, which is a health risk to humans. The increased surface UV also represents an increase in the vitamin D synthetic capacity of the sunlight. The cancer preventive effects of vitamin D represent a possible beneficial effect of ozone depletion. In terms of health costs, the possible benefits of increased UV irradiance may outweigh the burden.
1. Basal and Squamous Cell Carcinomas -- The most common forms of skin cancer in humans, basal and squamous cell carcinomas, have been strongly linked to UVB exposure. The mechanism by which UVB induces these cancers is well understood — absorption of UVB radiation causes the pyrimidine bases in the DNA molecule to form dimers, resulting in transcription errors when the DNA replicates. These cancers are relatively mild and rarely fatal, although the treatment of squamous cell carcinoma sometimes requires extensive reconstructive surgery. By combining epidemiological data with results of animal studies, scientists have estimated that a one percent decrease in stratospheric ozone would increase the incidence of these cancers by 2%.
2. Malignant Melanoma -- Another form of skin cancer, malignant melanoma, is much less common but far more dangerous, being lethal in about 15% - 20% of the cases diagnosed. The relationship between malignant melanoma and ultraviolet exposure is not yet well understood, but it appears that both UVB and UVA are involved. Experiments on fish suggest that 90 to 95% of malignant melanomas may be due to UVA and visible radiation whereas experiments on opossums suggest a larger role for UVB. Because of this uncertainty, it is difficult to estimate the impact of ozone depletion on melanoma incidence. One study showed that a 10% increase in UVB radiation was associated with a 19% increase in melanomas for men and 16% for women.

Ozone Production
Motor vehicles produce exhaust gases containing oxides of nitrogen such as nitrogen dioxide (NO2) and nitric oxide (NO).
At the high temperatures of the car's combustion chamber (cylinder), nitrogen and oxygen from the air react to form nitric oxide (NO):
N2(g) + O2(g) -----> 2NO(g)
Some of the nitric oxide (NO) reacts with oxygen to form nitrogen dioxide (NO2):
2NO(g) + O2(g) -----> 2NO2(g)
The mixture of nitric oxide (NO) and nitrogen dioxide (NO2) is sometimes referred to as NOx.
When the nitrogen dioxide (NO2) concentration is well above clean air levels and there is plenty of sunlight, then an oxygen atom splits off from the nitrogen dioxide molecule:
NO2(g)    sunlight---------->    NO(g)    +    O(g)
This oxygen atom (O) can react with oxygen molecules (O2) in the air to form ozone (O3): O + O2 -----> O3
Nitric oxide can remove ozone by reacting with it to form nitrogen dioxide (NO2) and oxygen (O2): NO(g) + O3(g) -----> NO2(g) + O2(g)
When the ratio of NO2 to NO is greater than 3, the formation of ozone is the dominant reaction. If the ratio is less than 0.3, then the nitric oxide reaction destroys the ozone at about the same rate as it is formed, keeping the ozone concentration below harmful levels.
The reaction of hydrocarbons (unburnt petrol) with nitric oxide and oxygen produce nitrogen dioxide also in the presence of sunlight, increasing the ratio of nitrogen dioxide to nitric oxide.

Module IV - Air Pollution

Air Pollution, contamination of the atmosphere by gaseous, liquid, or solid wastes or by-products that can endanger human health and the health and welfare of plants and animals, or can attack materials, reduce visibility, or produce undesirable odours.

Air Pollutant : Any substance in air that could, in high enough concentration, harm man, other animals, vegetation, or material. Pollutants may include almost any natural or artificial composition of airborne matter capable of being airborne. They may be in the form of solid particles, liquid droplets, gases, or in combination thereof. Generally, they fall into two main groups: (1) those emitted directly from identifiable sources and (2) those produced in the air by interaction between two or more primary pollutants, or by reaction with normal atmospheric constituents, with or without photoactivation. Exclusive of pollen, fog, and dust, which are of natural origin, about 100 contaminants have been identified and fall into the following categories: solids, sulfur compounds, volatile organic chemicals (VOC), nitrogen compounds, oxygen compounds, halogen compounds, radioactive compounds, and odors.
Worldwide air pollution is responsible for large numbers of deaths and cases of respiratory disease. While major stationary sources are often identified with air pollution, the greatest source of emissions is actually mobile sources, mainly automobiles. Gases such as carbon dioxide, which contribute to global warming, have recently gained recognition as pollutants by some scientists. Others recognize the gas as being essential to life, and therefore incapable of being classed as a pollutant.

Pollutants
There are many substances in the air which may impair the health of plants and animals (including humans), or reduce visibility. These arise both from natural processes and human activity. Substances not naturally found in the air or at greater concentrations or in different locations from usual are referred to as 'pollutants'.

Pollutants can be classified as either primary or secondary.

Primary pollutants are substances directly produced by a process, such as ash from a volcanic eruption or the carbon monoxide gas from a motor vehicle exhaust.

Secondary pollutants are not emitted. Rather, they form in the air when primary pollutants react or interact. An important example of a secondary pollutant is ground level ozone - one of the many secondary pollutants that make up photochemical smog.
Note that some pollutants may be both primary and secondary: that is, they are both emitted directly and formed from other primary pollutants.

Major primary pollutants produced by human activity include:

Sulfur oxides (SOx) especially sulfur dioxide, Nitrogen oxides (NOx) especially nitrogen dioxide, Carbon monoxide (CO), Carbon dioxide (CO2), a greenhouse gas.
Volatile organic compounds (VOC), such as hydrocarbon fuel vapors and solvents.
Particulate matter (PM), such as smoke and dust. PM10 is used to describe suspended particles 10 microns in diameter and smaller, and PM2.5 has a maximum particle size of 2.5 microns.
Metal oxides, especially those of lead, and to a lesser degree cadmium, copper, and iron
Chlorofluorocarbons (CFCs), harmful to the ozone layer.
Ammonia (NH3) , Odors, such as from garbage, sewage, and industrial processes.
Secondary pollutants include:
Particulate matter formed from gaseous primary pollutants and compounds in photochemical smog, such as nitrogen dioxide, Ground level ozone (O3), Peroxyacetyl nitrate (PAN)

Anthropogenic sources (human activity) related to burning different kinds of fuel
"Stationary Sources" as smoke stacks of power plants, manufacturing facilities, municipal waste incinerators
"Mobile Sources" as motor vehicles, aircraft etc., Combustion-fired power plants
Controlled burn practices used in agriculture and forestry management, Motor vehicles generating air pollution emissions, Marine vessels, such as container ships or cruise ships, and related port air pollution, Burning wood, fireplaces, stoves, furnaces and incinerators
Other anthropogenic sources
Oil refining, power plant operation and industrial activity in general, Chemicals, dust and crop waste burning in farming, (see Dust Bowl), Fumes from paint, hair spray, varnish, aerosol sprays and other solvents, Waste deposition in landfills, which generate methane.
Military uses, such as nuclear weapons, toxic gases, germ warfare and rocketry.
Natural sources
Dust from natural sources, usually large areas of land with little or no vegetation.
Methane, emitted by the digestion of food by animals, for example cattle.
Radon gas from radioactive decay within the Earth's crust.
Smoke and carbon monoxide from wildfires.
Volcanic activity, which produce sulfur, chlorine, and ash particulates. 


Pollutants

A substance in the air that can be adverse to humans and the environment is known as an air pollutant. Pollutants can be in the form of solid particles, liquid droplets, or gases. In addition, they may be natural or man-made. Pollutants can be classified as primary or secondary. Usually, primary pollutants are directly produced from a process, such as ash from a volcanic eruption, the carbon monoxide gas from a motor vehicle exhaust or sulfur dioxide released from factories. Secondary pollutants are not emitted directly. Rather, they form in the air when primary pollutants react or interact. An important example of a secondary pollutant is ground level ozone — one of the many secondary pollutants that make up photochemical smog. Some pollutants may be both primary and secondary: that is, they are both emitted directly and formed from other primary pollutants.

Major primary pollutants produced by human activity include:

    Sulfur oxides (SOx) - especially sulfur dioxide, a chemical compound with the formula SO2. SO2 is produced by volcanoes and in various industrial processes. Since coal and petroleum often contain sulfur compounds, their combustion generates sulfur dioxide. Further oxidation of SO2, usually in the presence of a catalyst such as NO2, forms H2SO4, and thus acid rain. This is one of the causes for concern over the environmental impact of the use of these fuels as power sources.
    Nitrogen oxides (NOx) - especially nitrogen dioxide are expelled from high temperature combustion, and are also produced naturally during thunderstorms by electric discharge. Can be seen as the brown haze dome above or plume downwind of cities. Nitrogen dioxide is the chemical compound with the formula NO2. It is one of the several nitrogen oxides. This reddish-brown toxic gas has a characteristic sharp, biting odor. NO2 is one of the most prominent air pollutants.
    Carbon monoxide (CO)- is a colourless, odourless, non-irritating but very poisonous gas. It is a product by incomplete combustion of fuel such as natural gas, coal or wood. Vehicular exhaust is a major source of carbon monoxide.

    Volatile organic compounds - VOCs are an important outdoor air pollutant. In this field they are often divided into the separate categories of methane (CH4) and non-methane (NMVOCs). Methane is an extremely efficient greenhouse gas which contributes to enhanced global warming. Other hydrocarbon VOCs are also significant greenhouse gases via their role in creating ozone and in prolonging the life of methane in the atmosphere, although the effect varies depending on local air quality. Within the NMVOCs, the aromatic compounds benzene, toluene and xylene are suspected carcinogens and may lead to leukemia through prolonged exposure. 1,3-butadiene is another dangerous compound which is often associated with industrial uses.

    Particulates, alternatively referred to as particulate matter (PM), atmospheric particulate matter, or fine particles, are tiny particles of solid or liquid suspended in a gas. In contrast, aerosol refers to particles and the gas together. Sources of particulates can be man made or natural. Some particulates occur naturally, originating from volcanoes, dust storms, forest and grassland fires, living vegetation, and sea spray. Human activities, such as the burning of fossil fuels in vehicles, power plants and various industrial processes also generate significant amounts of aerosols. Averaged over the globe, anthropogenic aerosols—those made by human activities—currently account for about 10 percent of the total amount of aerosols in our atmosphere. Increased levels of fine particles in the air are linked to health hazards such as heart disease, altered lung function and lung cancer.

    Persistent free radicals connected to airborne fine particles could cause cardiopulmonary disease.

    Toxic metals, such as lead and mercury, especially their compounds.
    Chlorofluorocarbons (CFCs) - harmful to the ozone layer emitted from products currently banned from use.
    Ammonia (NH3) - emitted from agricultural processes. Ammonia is a compound with the formula NH3. It is normally encountered as a gas with a characteristic pungent odor. Ammonia contributes significantly to the nutritional needs of terrestrial organisms by serving as a precursor to foodstuffs and fertilizers. Ammonia, either directly or indirectly, is also a building block for the synthesis of many pharmaceuticals. Although in wide use, ammonia is both caustic and hazardous.
    Odors — such as from garbage, sewage, and industrial processes
    Radioactive pollutants - produced by nuclear explosions, nuclear events, war explosives, and natural processes such as the radioactive decay of radon.

Secondary pollutants include:

    Particulates created from gaseous primary pollutants and compounds in photochemical smog. Smog is a kind of air pollution; the word "smog" is a portmanteau of smoke and fog. Classic smog results from large amounts of coal burning in an area caused by a mixture of smoke and sulfur dioxide. Modern smog does not usually come from coal but from vehicular and industrial emissions that are acted on in the atmosphere by ultraviolet light from the sun to form secondary pollutants that also combine with the primary emissions to form photochemical smog.
    Ground level ozone (O3) formed from NOx and VOCs. Ozone (O3) is a key constituent of the troposphere. It is also an important constituent of certain regions of the stratosphere commonly known as the Ozone layer. Photochemical and chemical reactions involving it drive many of the chemical processes that occur in the atmosphere by day and by night. At abnormally high concentrations brought about by human activities (largely the combustion of fossil fuel), it is a pollutant, and a constituent of smog.
    Peroxyacetyl nitrate (PAN) - similarly formed from NOx and VOCs.

Minor air pollutants include:

    A large number of minor hazardous air pollutants. Some of these are regulated in USA under the Clean Air Act and in Europe under the Air Framework Directive
    A variety of persistent organic pollutants, which can attach to particulates

Persistent organic pollutants (POPs) are organic compounds that are resistant to environmental degradation through chemical, biological, and photolytic processes. Because of this, they have been observed to persist in the environment, to be capable of long-range transport, bioaccumulate in human and animal tissue, biomagnify in food chains, and to have potential significant impacts on human health and the environment.


Major air pollutants and their associated health hazards


Name of pollutant
Health impacts
RSPM (Respirable Particulate Matter)
Respiratory illness, including chronic bronchitis and asthma; heart diseases.
SO2
Heart diseases; respiratory problems including pulmonary emphysema, cancer, eye burning, headache, etc.
NO2
Lung irritation, viral infection, airway resistance, chest tightness, etc.
SPM (Suspended Particulate Matter)
Pneumoconiosis, restrictive lung diseases, asthma, cancer, etc.
Benzene
It causes immunotoxicity, carcinogenicity, asthma, anemia, unconsciousness etc.
Ozone
Impaired lung function, chest pains, coughing, irritation of eyes, nose etc.
CO
CO poisoning cause cherry lips, unconsciousness, death by asphyxiation etc.
Lead
It causes decreased haemoglobin synthesis, anemia, damage the nervous and renal (kidney) systems etc.
 

Module IV - Various segments of atmosphere and their significance

Various segments of Atmosphere & their significance

Earth's atmosphere is a layer of gases surrounding the planet Earth and retained by the Earth's gravity. It contains roughly (by molar content/volume) 78% nitrogen, 20.95% oxygen, 0.93% argon, 0.038% carbon dioxide, trace amounts of other gases, and a variable amount (average around 1%) of water vapor. This mixture of gases is commonly known as air. The atmosphere protects life on Earth by absorbing ultraviolet solar radiation and reducing temperature extremes between day and night.
There is no definite boundary between the atmosphere and outer space. It slowly becomes thinner and fades into space. Three quarters of the atmosphere's mass is within 11 km of the planetary surface. In the United States, people who travel above an altitude of 80.5 km (50 statute miles) are designated astronauts. An altitude of 120 km (~75 miles or 400,000 ft) marks the boundary where atmospheric effects become noticeable during re-entry. The Kármán line, at 100 km (62 miles or 328,000 ft), is also frequently regarded as the boundary between atmosphere and outer space.

The temperature of the Earth's atmosphere varies with altitude; the mathematical relationship between temperature and altitude varies among six different atmospheric layers:

Troposphere: The troposphere is the lowest layer of the atmosphere; it begins at the surface and extends to between 7 km (23,000 ft) at the poles and 17 km (60,000 ft) at the equator, with some variation due to weather factors. The troposphere has a great deal of vertical mixing due to solar heating at the surface. This heating warms air masses, which makes them less dense so they rise. When an air mass raises the pressure upon it decreases so it expands, doing work against the opposing pressure of the surrounding air. To do work is to expend energy, so the temperature of the air mass decreases. As the temperature decreases, water vapor in the air mass may condense or solidify, releasing latent heat that further uplifts the air mass. This process determines the maximum rate of decline of temperature with height, called the adiabatic lapse rate.

Stratosphere: The stratosphere extends from the troposphere's 7 to 17 km (23,000 – 60,000 ft) range to about 50 km (160,000 ft). Temperature increases with height. The stratosphere contains the ozone layer, the part of the Earth's atmosphere which contains relatively high concentrations of ozone. "Relatively high" means a few parts per million—much higher than the concentrations in the lower atmosphere but still small compared to the main components of the atmosphere. It is mainly located in the lower portion of the stratosphere from approximately 15 to 35 km (50,000 – 115,000 ft) above Earth's surface, though the thickness varies seasonally and geographically.

Mesosphere: The mesosphere extends from about 50 km (160,000 ft) to the range of 80 to 85 km (265,000 – 285,000 ft), temperature decreasing with height.

Thermosphere: From 80 – 85 km (265,000 – 285,000 ft) to 640+ km (400+ mi), temperature increasing with height.
Ionosphere: It is the part of the atmosphere that is ionized by solar radiation. It plays an important part in atmospheric electricity and forms the inner edge of the magnetosphere. It has practical importance because, among other functions, it influences radio propagation to distant places on the Earth. It is located in the thermosphere and is responsible for auroras.

Exosphere: From 500 – 1000 km (300 – 600 mi) up to 10,000 km (6,000 mi), free-moving particles that may migrate into and out of the magnetosphere or the solar wind.

The boundaries between these regions are named the tropopause, stratopause, mesopause, thermopause and exobase.

The average temperature of the atmosphere at the surface of Earth is 15 °C (59 °F).

The average atmospheric pressure, at sea level, is about 101.3 kilopascals [1 pascal (Pa) = 1 N/m2 = 1 kg/(m•s2), The newton is the unit of force derived in the SI system; it is equal to the amount of net force required to accelerate a mass of one kilogram at a rate of one meter per second per second.] [about 14.7 psi, the pound per square inch or, more accurately, pound-force per square inch. It is the pressure resulting from a force of one pound-force applied to an area of one square inch:1 psi approximately equals 6,894.757 Pa, where pascal (Pa) is the SI unit of pressure.]; total atmospheric mass is 5.2 x 1018 kg (1.135×1019 lb).

Atmospheric pressure is a direct result of the total weight of the air above the point at which the pressure is measured. This means that air pressure varies with location and time, because the amount (and weight) of air above the earth varies with location and time.

Atmospheric pressure decreases with height, dropping by 50% at an altitude of about 5.6 km (18,000 ft). Equivalently, about 50% of the total atmospheric mass is within the lowest 5.6 km. This pressure drop is approximately exponential, so that each doubling in altitude results in an approximate decrease in pressure by half. However, because of changes in temperature throughout the atmospheric column, as well as the fact that the force of gravity begins to decrease at great altitudes, a single equation does not model atmospheric pressure through all altitudes (it is modeled in 7 exponentially decreasing layers, in the equations given above).

Even in the exosphere, the atmosphere is still present (as can be seen for example by the effects of atmospheric drag on satellites).

The following published data are given for reference:
50% of the atmosphere by mass is below an altitude of 5.6 km.
90% of the atmosphere by mass is below an altitude of 16 km. The common cruising altitude of commercial airliners is about 10 km.
99.99997% of the atmosphere by mass is below 100 km (almost all of it). The highest X-15 plane flight in 1963 reached an altitude of 354,300 ft or 108 km.
Therefore, most of the atmosphere (99.9997%) is below 100 km, although in the rarefied region above this there are auroras and other atmospheric effects.

Composition of dry atmosphere, by volume ppmv: parts per million by volume

Nitrogen (N2) - 780,840 ppmv (78.084%) Oxygen (O2) - 209,460 ppmv (20.946%)
Argon (Ar) - 9,340 ppmv (0.9340%) Carbon dioxide (CO2) - 383 ppmv (0.0383%)
Neon (Ne) - 18.18 ppmv Helium (He) - 5.24 ppmv Methane (CH4) - 1.745 ppmv
Krypton (Kr) - 1.14 ppmv Hydrogen (H2) - 0.55 ppmv

Not included in above dry atmosphere:
Water vapor (H2O) ~0.25% over full atmosphere, typically 1% to 4% near surface

Minor components of air not listed above include
nitrous oxide - 0.5 ppmv xenon - 0.09 ppmv ozone - 0.0 to 0.07 ppmv nitrogen dioxide - 0.02 ppmv iodine - 0.01 ppmv carbon monoxide – trace ammonia

The density of air at sea level is about 1.2 kg/m3(1.2 g/L). Natural variations of the barometric pressure occur at any one altitude as a consequence of weather. This variation is relatively small for inhabited altitudes but much more pronounced in the outer atmosphere and space due to variable solar radiation.
The atmospheric density decreases as the altitude increases. This variation can be approximately modeled using the barometric formula. More sophisticated models are used by meteorologists and space agencies to predict weather and orbital decay of satellites.

The average mass of the atmosphere is about 5,000 trillion metric tons or 1/1,200,000 the mass of Earth. According to the National Center for Atmospheric Research, "The total mean mass of the atmosphere is 5.1480×1018 kg with an annual range due to water vapor of 1.2 or 1.5×1015 kg depending on whether surface pressure or water vapor data are used; somewhat smaller than the previous estimate. The mean mass of water vapor is estimated as 1.27×1016 kg and the dry air mass as 5.1352 ±0.0003×1018 kg."

Thursday, 24 October 2013

Project work Format

1. Title: Water Resource and Waste-Water Management in a City
2. Name of the city: Surroundings – name of the nearest towns and villages
3. Area: in square kilometers
4. Climate: Rainfall with seasonal variation and Temperature with seasonal variation
5. Population:
6. Natural Drainage channels: rivers and rivulets and waterbodies
7. Industry and/or Mines within or nearest location
8. Water Resources:
8.1 Underground Water
8.2 Surface Water
8.3 Runoff water
8.4 Waterbodies within or around
9. Requirement of water
9.1 Drinking water
9.2 Domestic/Household work water
9.3 Industry/Mine water
10. Waste Water
10.1 Amount of municipal waste water
10.2 Amount of Industrial/Mine waste water
11. Waste water treatment
12. Observation
13. Suggestions
14. Maps and Graphs
15. Annexures
15.1 Standards for water
15.2 Technical Terms


Thursday, 19 September 2013

Population Explosion

POPULATION EXPLOSION

Carrying capacity – It is a concept developed by biologists to describe the maximum number of any specific population that a habitat can support.

Overpopulation is a condition where an organism's numbers exceed the carrying capacity of its habitat. In common parlance, the term usually refers to the relationship between the human population and its environment, the Earth.

Overpopulation is a condition where an organism's numbers exceed the carrying capacity of its habitat. In common parlance, the term usually refers to the relationship between the human population and its environment, the Earth.

Overpopulation does not depend only on the size or density of the population, but on the ratio of population to available sustainable resources. It also depends on the means of resources used and distributed throughout the population. If a given environment has a population of 10 individuals, but there is food or drinking water enough for only 9, then in a closed system where no trade is possible, that environment is overpopulated; if the population is 100 but there is enough food, shelter, and water for 200 for the indefinite future, then it is not overpopulated. Overpopulation can result from an increase in births, a decline in mortality rates due to medical advances, from an increase in immigration, or from an unsustainable biome and depletion of resources. It is possible for very sparsely-populated areas to be overpopulated, as the area in question may have a meager or non-existent capability to sustain human life (e.g. the middle of the Sahara Desert or Antarctica).

The resources to be considered when evaluating whether an ecological niche is overpopulated include clean water, clean air, food, shelter, warmth, and other resources necessary to sustain life. If the quality of human life is addressed, there may be additional resources considered, such as medical care, education, proper sewage treatment and waste disposal. Overpopulation places competitive stress on the basic life sustaining resources, leading to a diminished quality of life. Some countries have managed to increase their carrying capacity by using technologies such as modern agriculture, desalination, and nuclear power.


World Human Population

1804 – 1 Billion

1959 – 3 Billion

2011 – 7 Billion

The world population is currently growing by approximately 74 million people per year. Current United Nations predictions estimate that the world population will reach 9.0 billion around 2050

Almost all growth will take place in the less developed regions, where today's 5.3 billion population of underdeveloped countries is expected to increase to 7.8 billion in 2050.

During 2005–2050, nine countries are expected to account for half of the world's projected population increase: India, Pakistan, Nigeria, Democratic Republic of the Congo, Bangladesh, Uganda, United States, Ethiopia, and China, listed according to the size of their contribution to population growth.

Urban growth
Urban areas with at least one million inhabitants in 2006.
3% of the world's population lived in cities in 1800, rising to 47% at the end of the twentieth century.

The increase will be most dramatic in the poorest and least-urbanised continents, Asia and Africa. Projections indicate that most urban growth over the next 25 years will be in developing countries.
One billion people, one-sixth of the world's population, or one-third of urban population, now live in shanty towns, which are seen as "breeding grounds" for social problems such as crime, drug addiction, alcoholism, poverty and unemployment.
In many poor countries, slums exhibit high rates of disease due to unsanitary conditions, malnutrition, and lack of basic health care.







Wednesday, 18 September 2013

Module - III - Environmental Pollution - Transformation

Pollutant
A substance present in nature, in greater than natural abundance due to human activity, which ultimately has a detrimental effect on the environment and therefrom on living organisms and mankind.
Ex:
Lead, Mercury, Sulphur-dioxide, Carbon-dioxide etc…..

Contaminant
Any potentially undesirable substance (physical, chemical or biological).
It usually refers to the introduction of harmful human-made substances. However, some substances that may have harmful effects at high levels, like cadmium, occur naturally in ecosystems and may also be introduced through human activities.

Contaminants can be man-made substances produced by factories, such as DDT..It is the substance's long life and its ability to spread over a wide area that makes an industrial contaminant such a problem.

When Environmental Pollution takes place?
When the environment cannot process and neutralize harmful by-products of human activities (for example, poisonous gas emissions) in due course without any structural or functional damage to its system.

A pollutant is a waste material that pollutes air, water or soil. Three factors determine the severity of a pollutant:
Chemical nature
Concentration
Persistence

Sources of Environmental Pollution

Fossil Fuels
Oil. Gas. Coal
Products as all sorts of plastics.
Solvents. Detergents.
A wide range of chemicals for industrial use

Common sources of fossil fuel pollution:
Industry:
Power-generating plants
Petroleum refineries
Petrochemical plants
Production and distribution of fossil fuels
Other manufacturing facilities

Transport:
Road transport (motor vehicles)
Shipping industry
Aircraft

Combustion. Construction. Mining. Agriculture. Warfare.
Non-Fossil Fuel Sources
Agriculture and Livestock Farming - Largest generator of ammonia emissions resulting in air pollution.
Chemicals such as pesticides and fertilizers are also widely used in agriculture, which may lead water pollution and soil contamination as well.
Trading activities may be another source of pollution.
Packaging of products sold in supermarkets and other retail outlets, Residential sector and Medical Wastes generates large quantities of solid waste that ends up either in landfills or municipal incinerators leading to soil contamination and air pollution.

Environmental Pollution

Physical
Chemical
Biological      

As soon as a pollutant enters environment, agencies of transfer, transport start acting on it almost simultaneously.
While the pollutant is dispersed in the medium and diluted, it also undergoes abiotic transformation in which solar radiations; water and air play an important part.
The pollutant may thus be broken down or altered in the abiotic environment itself.
Abiotic transformation of pollutants is the only process available in the atmosphere
as it lacks the biotic agencies which occur on land as well as in water.

Abiotic and Biotic transformation may alter or degrade the pollutant molecules.  How?

Photolysis:  absorption of solar radiations - pollutant molecules in the environment react photo-chemically and acquire an excited state – change in molecular structure
Hydrolysis:  Hydrolytic dissociation of pollutants is a process which is of greater importance on land and in water

Biotic Transformation of Pollutants
Microbial and Plant activity – In Soil and Water
End Product - Formation of Hydrocarbons (e.g. methane CH4, alkanes, alkenes, aromatics), ammonia (NH3), hydrogen sulfide (H2S) and R-S, reduced metal oxides (Fe2+, Mn2+).

Chemical Processes Involved –

Oxidation
Reduction
Hydrolysis
Elimination
Substitution
Photolysis

From where we can get the samples for Pilot Study for the Transformations?

 Waste Disposal Sites
 Sewage Channels before mixing to the main drainage channels
 Ambient air from Industrial, Mining, Agricultural Areas
 River Channels within Agricultural fields